user_mobilelogo
Facebook
Dienstag, 21 Februar 2017 12:36

Bild des Monats: Februar - Unser erster Bildraub...

Bild des Monats: Februar - Unser erster Bildraub...

...den wir natürlich nicht selbst begangen haben. Viel mehr wurden wir zum ersten mal Opfer (zum ersten mal zumindest, soweit wir davon wissen). Obwohl es uns jetzt nicht besonders schlimm erwischt hat, Grund genug mal über die ganze Problematik nachzudenken, aber auch sich über ein offenbar gutes Bild zu freuen, das sich sein Erscheinen in dieser Rubrik damit redlich verdient hat.

Das Bild

Bevor wir zur Thematik des Bilderklaus kommen, ein paar Worte zum Gegenstand an sich. Das Bild entstand bereits 2013 in Australien. Zu sehen ist ein Teil der 12 Apostel, eine bekannte Küstenformation und zugleich Touristenattraktion an der Great Ocean Road, einer bekannten 243km langen Straße entlang der Südküste des Kontinents im Bundesstaat Victoria. Das Motiv findet man zuhauf im Netz, es ist eigentlich nichts besonderes. Wir erreichten den dazugehörigen Aussichtspunkt am Ende eines ereignisreichen Tages pünktlich zum Sonnenuntergang. Die Sonne selbst ist nicht zusehen, man kann aber erahnen, dass sie flach über dem Horizont steht. Stattdessen scheint der Himmel zu glühen und genau das macht die eigentliche Wirkung des Bildes aus und verhilft ihm zu seiner besonderen Lichtstimmung. Darüber hinaus erweckt es den Anschein, als würde hinter dem Betrachter gleich ein mächtiges Gewitter aufziehen (und tatsächlich hat dies dann auch den Versuch einer Langzeitbelichtung mittels ND-Filter vereitelt). Die EXIF-Daten bieten somit auch keine Überraschungen, seien an dieser Stelle aber der Vollständigkeit halber erwähnt: 27mm bei f/5.6, 1/100s und ISO200, fotografiert mit einer Canon EOS 6D samt Canon EF 24-70mm f/2.8 L. Nennenswerte Bearbeitung fand mit Ausnahme der künstlichen Vignettierung tatsächlich nicht statt.

Was war passiert?

Nun zum eigentlichen Aufhänger dieses Beitrags. Der Sachverhalt ist schnell zusammengefasst. Am 27. Januar dieses Jahres posteten wir auf unserem Instagram Profil das Bild wie folgt:

Auf keiner anderen Plattform hatten wir bis zu diesem Zeitpunkt das Bild irgendwie der Öffentlichkeit zugänglich gemacht. Noch am gleichen Tag erschien es dennoch auf der Facebook Seite der Great Ocean Road. Das Bild ist also von Instagram zu Facebook gewandert, und zwar dort auf eine tourismusmarketing-geprägte Seite, die einen zumindest ansatzweise kommerziellen Eindruck macht. Immerhin gibt es ein Impressum mit Adresse und Telefonnummer und jede Menge Posts, die ganz offensichtlich an zukünftige Besucher gerichtet sind. Zudem wurde das Bild in einen zwar nicht schlimmen, aber dennoch so nicht existenten Kontext gebracht ("Long weekend road tripping").

Unser Bild wurde also zumindest im weiteren Sinne kommerziell genutzt, ohne dass von uns irgendwelche Verwertungsrechte eingeräumt wurden. Natürlich kann man den konkreten Wert dieser Nutzung nur schwer bemessen und wir verdienen mit unseren Bildern auch nicht unseren Lebensunterhalt, können das also relativ entspannt sehen. Wir verkneifen uns erst recht eine urheberrechtliche Einordnung über Länder- und Kontinentgrenzen hinweg. Aber ein bisschen geht's hier einfach auch ums Prinzip! Wir würden vorher einfach gerne gefragt werden.

Wie kriegt man überhaupt mit, dass einem ein Bild geklaut wurde?

In unserem konkreten Fall wurden wir immerhin als Quelle verlinkt und haben so eine entsprechende Facebook-Notification bekommen. Das macht das ganze auch noch relativ erträglich. Gefragt werden würden wir trotzdem gerne (wurden wir auch schon, und haben nie nein gesagt). Und solange wir nicht von unseren Bildern leben müssen, werden wir eine Weiterverwendung vermutlich auch immer erlauben. Nicht zuletzt kann das der initiale Kontakt für eine Kooperation sein, die beiden Seiten was bringt!

Wenn man allerdings nicht durch Notifications aufgrund von Verlinkungen in sozialen Netzwerken automatisch benachrichtigt wird, muss man selbst aktiv werden. Das erfordert aber Zeit, die man unter Umständen nicht hat, erst recht, wenn das eigene öffentliche Portfolio sehr groß ist. Ein erster Ansatzpunt kann die Google Bildersuche sein. Ein Klick auf die kleine Kamera im Texteingabefeld erlaubt es einem dort nach konkreten Bildern (statt nach Worten) zu suchen. Mittlerweile gibt es aber auch diverse Webdienste, die sich auf die Aufdeckung von Bilderdiebstahl spezialisiert haben, zumeist aber kostenpflichtig sind. Da wir mangles Erfahrung keine Empfehlungen in dieser Hinsicht geben können, verweisen wir auf eine entsprechende Google Suche zum Thema. Zielgruppe dieser Dienste ist sicherlich in erster Linie auch eher der Berufsfotograf. 

Was kann man dagegen tun?

Im Grunde nicht so viel, zumindest nichts, womit man sich nicht auch selbst ein Stück weit ins eigene Fleisch schneidet. Die folgenden Möglichkeiten bieten sich an:

  • Da wäre zunächst das allseits beliebte Wasserzeichen. Auch wir machen davon regelmäßigen Gebrauch, allerdings weniger als Kopierschutz, sondern um einfach unsere Identität ein wenig mehr zu transportieren. Bei Wasserzeichen stellt sich immer die Frage, wie aufdringlich man sie gestaltet und platziert. Einerseits möchte man, dass sie den Bildeindruck nicht wesentlich verändern, andererseits aber schon, dass sie sie wahrgenommen werden. Man muss also das richtige Maß finden bei dem Gebrauch von Farben (insbesondere bei allem was nicht grau ist), Göße und Position. Je nach Motiv gilt es unter Umständen da individuell zu entscheiden. Beim folgenden Bild aus dem Elbsandsteingebirge haben wir zum ersten mal selbst reichlich Kritik (auf Facebook) für unser Wasserzeichen einstecken müssen, wurden im gleichen Atemzug aber für das Motiv selbst gelobt. Im Nachhinein absolut nachvollziehbar. Da setzte einfach die mit der Zeit zunehmende Blindheit für das eigene Wasserzeichen ein. Ohnehin muss man sich eingestehen: verwendet man das Wasserzeichen als Kopierschutz, sollte man sich darüber im Klaren sein, dass wegstempelm und beschneiden sehr wirksame Gegenmaßnahmen sind, es sei denn, man plaziert sein Wasserzeichen mit einer gewissen Transparenz großflächig im Bild. Das wollen wir persönlich aber aus Gründen der Präsentationsqualität eher vermeiden.
  • Außerdem kann man sich behelfen mit einer geringen Auflösung, die den Bilderklau unattraktiv macht. In der Zeit von hochaufgelösten Retina-Bildschirmen stößt das dem Betrachter aber wahrscheinlich auch sauer auf. Davon abgesehen ist einem vermutlich ja selbst daran gelegen, sein Bild in bestmöglicher Qualität zu zeigen, um den maximalen Eindruck zu erzielen. Ein Blick in die Hilfeseiten von Instagram verrät, dass unser Bild mit einer Bildbreite von maximal 1080 Pixeln geklaut worden sein kann. Das ist relativ wenig, aber auch noch nicht ausreichend störend im Format eines Facebook-Posts.
  • Zu guter Letzt bleibt einem natürlich noch die Möglichkeit seine Inhalte durch Account Privatisierung zu schützen. Instagram Accounts können beispielsweise privat betrieben werden, so dass nur Follower die eigenen Bilder zu Gesicht bekommen können. Bei Facebook kann sie Sichtbarkeit eines Bildes auf den eigenen Freundeskreis beschränkt werden, etc... Davon abgesehen, dass auch das keinen 100%igen Schutz bietet, läuft es dem Ziel seine Bilder der breiten Öffentlichkeit zu präsentieren massiv zuwider, ist also auch nicht zielführend.

Fazit

Wie man sich selbst nun verhalten soll, muss man detailliert nach eigenen Interessen und konkretem Motiv entscheiden. Reichen passive Maßnahmen wie Wasserzeichen? Habe ich die Zeit aktiv nach meinen Bildern auf Seiten dritter zu suchen? Verdiene ich mit Bildern meinen Lebensunterhalt und bin deshalb von Reichweite abhängig? Bin ich tatsächlich bereit im Zweifelsfall rechtliche Schritte zu unternehmen? Das muss letztendlich jeder für sich selbst wissen. Eure Meinungen und Strategien würden uns allerdings stark interessieren! Wir freuen uns dementsprechend wie immer über Kommentare eurerseits (unter diesem Beitrag oder bei Facebook)!


Dir gefällt was du siehst? Dann zwitschere uns weiter oder like uns auf Facebook

24148 Kommentare

  • Kommentar-Link Jameskat Dienstag, 29 April 2025 04:06 gepostet von Jameskat

    Possibilities
    The authors of the study, published May 6 in the journal Monthly Notices of the Royal Astronomical Society, specifically set out to search for Dyson spheres, in the form of infrared heat near stars that couldn’t be explained in any other way.
    kraken вход
    Using historical data from telescopes that pick up infrared signatures, the research team looked at stars located within less than 1,000 light-years from Earth: “We started with a sample of 5 million stars, and we applied filters to try to get rid of as much data contamination as possible,” said lead study author Matias Suazo, a doctoral student in the department of physics and astronomy of Uppsala University in Sweden.

    “So far, we have seven sources that we know are glowing in the infrared but we don’t know why, so they stand out.”
    https://kra31att.cc
    kraken официальный сайт
    There is no conclusive evidence that the seven stars have Dyson spheres around them, Suazo cautioned.

    “It’s difficult for us to find an explanation for these sources, because we don’t have enough data to prove what is the real cause of the infrared glow,” he said. “They could be Dyson spheres, because they behave like our models predict, but they could be something else as well.”

    Among the natural causes that could explain the infrared glow are an unlucky alignment in the observation, with a galaxy in the background overlapping with the star, planetary collisions creating debris, or the fact that the stars may be young and therefore still surrounded by disks of hot debris from which planets would later form.
    The data used by the researchers comes from two active space telescopes — the Wide-field Infrared Survey Explorer, or WISE, from NASA and Gaia from the European Space Agency — as well as an astronomical survey of the sky in infrared light called The Two Micron All Sky Survey. Also known as 2MASS, the collaboration between the University of Massachusetts and the US space agency’s Jet Propulsion Laboratory took place between 1997 and 2001.

  • Kommentar-Link Frankjep Dienstag, 29 April 2025 02:33 gepostet von Frankjep

    Possibilities
    The authors of the study, published May 6 in the journal Monthly Notices of the Royal Astronomical Society, specifically set out to search for Dyson spheres, in the form of infrared heat near stars that couldn’t be explained in any other way.
    kraken darknet
    Using historical data from telescopes that pick up infrared signatures, the research team looked at stars located within less than 1,000 light-years from Earth: “We started with a sample of 5 million stars, and we applied filters to try to get rid of as much data contamination as possible,” said lead study author Matias Suazo, a doctoral student in the department of physics and astronomy of Uppsala University in Sweden.

    “So far, we have seven sources that we know are glowing in the infrared but we don’t know why, so they stand out.”
    https://kra31att.cc
    kra31 at
    There is no conclusive evidence that the seven stars have Dyson spheres around them, Suazo cautioned.

    “It’s difficult for us to find an explanation for these sources, because we don’t have enough data to prove what is the real cause of the infrared glow,” he said. “They could be Dyson spheres, because they behave like our models predict, but they could be something else as well.”

    Among the natural causes that could explain the infrared glow are an unlucky alignment in the observation, with a galaxy in the background overlapping with the star, planetary collisions creating debris, or the fact that the stars may be young and therefore still surrounded by disks of hot debris from which planets would later form.
    The data used by the researchers comes from two active space telescopes — the Wide-field Infrared Survey Explorer, or WISE, from NASA and Gaia from the European Space Agency — as well as an astronomical survey of the sky in infrared light called The Two Micron All Sky Survey. Also known as 2MASS, the collaboration between the University of Massachusetts and the US space agency’s Jet Propulsion Laboratory took place between 1997 and 2001.

  • Kommentar-Link BradleyCic Dienstag, 29 April 2025 00:53 gepostet von BradleyCic

    Possibilities
    The authors of the study, published May 6 in the journal Monthly Notices of the Royal Astronomical Society, specifically set out to search for Dyson spheres, in the form of infrared heat near stars that couldn’t be explained in any other way.
    kra30at
    Using historical data from telescopes that pick up infrared signatures, the research team looked at stars located within less than 1,000 light-years from Earth: “We started with a sample of 5 million stars, and we applied filters to try to get rid of as much data contamination as possible,” said lead study author Matias Suazo, a doctoral student in the department of physics and astronomy of Uppsala University in Sweden.

    “So far, we have seven sources that we know are glowing in the infrared but we don’t know why, so they stand out.”
    https://kra31att.cc
    kraken вход
    There is no conclusive evidence that the seven stars have Dyson spheres around them, Suazo cautioned.

    “It’s difficult for us to find an explanation for these sources, because we don’t have enough data to prove what is the real cause of the infrared glow,” he said. “They could be Dyson spheres, because they behave like our models predict, but they could be something else as well.”

    Among the natural causes that could explain the infrared glow are an unlucky alignment in the observation, with a galaxy in the background overlapping with the star, planetary collisions creating debris, or the fact that the stars may be young and therefore still surrounded by disks of hot debris from which planets would later form.
    The data used by the researchers comes from two active space telescopes — the Wide-field Infrared Survey Explorer, or WISE, from NASA and Gaia from the European Space Agency — as well as an astronomical survey of the sky in infrared light called The Two Micron All Sky Survey. Also known as 2MASS, the collaboration between the University of Massachusetts and the US space agency’s Jet Propulsion Laboratory took place between 1997 and 2001.

  • Kommentar-Link kqxs binh duong Montag, 28 April 2025 09:56 gepostet von kqxs binh duong

    I loved as much as you'll receive carried out
    right here. The sketch is attractive, your authored subject matter stylish.
    nonetheless, you command get got an impatience over that you wish be
    delivering the following. unwell unquestionably come further formerly
    again since exactly the same nearly very often inside case you shield this hike.

  • Kommentar-Link Zacharykible Montag, 28 April 2025 08:16 gepostet von Zacharykible

    металлические значки на заказ с логотипом https://metallicheskie-znachki-zakaz.ru/

  • Kommentar-Link Zacharykible Montag, 28 April 2025 08:15 gepostet von Zacharykible

    печать металлических значков производство металлических значков

  • Kommentar-Link HaroldSpide Montag, 28 April 2025 04:37 gepostet von HaroldSpide

    Manuala metode
    Manuala FUE procedura tiek izmantots tikai roku darbs, graftus atdalot ar instrumentu, kura diametrs ir 0.9-1.00 mm. Parstadits tiek viss grafts, kas parasti satur 1-4 matu folikulus, nedalot atseviski pa 1 graftam, tadejadi iegustot kuplu un dabigu rezultatu.
    Matu izkrisana
    Dr. Ilze Runce veicot griezienus, strada ar mikroskopu, kas dod iespeju iegut matu biezumu, kas maksimali pietuvinats dabigajam un viena procedura iespejams parstadit lidz pat 4000 graftu. Manuala FUE metode tiek izmantota ari uzacu un bardas parstadisana. Procedura norit vieteja anestezija un ir klientam komfortabla – tas laika pacients visu laiku atrodas sedus stavokli proceduru kresla un var lietot datoru, telefonu, planseti, lasit gramatu vai skatities TV.

    Dr. Ilze Runce ir manualas metodes aizsaceja Latvija, ir atseviski apguvusi so metodi Kazahstana 1 gada garuma pie nozares profesionaliem un ieviesusi to Latvija kops 2013.gada, kopuma ir veikusi jau vairak ka 1000 manualas FUE proceduras.

    Aprakstu sagatavoja Dr. Ilze Runce

    Manualas metodes cena ieklauts viss nepieciesamais:
    nepieciesamais graftu daudzums;
    visi pecoperacijas medikamenti;
    sprejs;
    sampuns;
    cepurite;
    pusdienas proceduras diena;
    parsiesana nakamaja diena (pec nepieciesamibas).
    MATU IZKRISANA

    Pastiprinata matu izkrisana jeb alopecija skar gan viriesus, gan sievietes. Ta var but saistita ar novecosanos, genetiku, hroniskam slimibam, ieilgusu stresu, ka ari specifiskam imunas sistemas reakcijam. Mati klust plani vai pilniba izkrit. Ari retas un apdegumi zonas, kur agrak ir bijis apmatojums, (piemeram, uzacis) var radit estetisku diskomfortu.

    Matu parstadisanas procedura ir efektivs risinajums gadijumos, kad medikamenti un arstnieciskas proceduras nepalidz!

  • Kommentar-Link Zacharykible Montag, 28 April 2025 03:55 gepostet von Zacharykible

    металлические значки москва значки на заказ

  • Kommentar-Link ErnestWreme Montag, 28 April 2025 01:05 gepostet von ErnestWreme

    Bitcoin blender is a Bitcoin mixing service that provides privacy by using the ‘Bitcoin Mixer 2.0’ algorithm to shuffle bitcoins. Unlike other similar tumbling services that mix your coins with the coins of other users, this platform mixes your crypto with the crypto bought by them directly from the cryptocurrency stock exchanges. Bitcoin blender verifies the newly purchased coins with a scoring system with the help of innovative algorithms and outfoxes such technologies as blockchain volume analysis, cluster analysis, taint analysis, etc. It means that you will receive your BTC back split into random parts, and even at the different addresses if needed. Consequently, your privacy is protected as there is no connection to you. And it takes up to 6 hours to complete your request. Another privacy feature of this mixer service is that it does not require registration and it does not store logs. All the transactions are digitally signed with letters of guarantee that you can check on the website at any moment. They also provide 24/7 technical support. MixTum.io will charge you a 5% Fee from your transaction as well as a network fee of 0.00015 BTC. The platform provides two versions – for Clearnet and Tor browsers. Yomix : Excellent customer support Bitcoin Mixer : It offers flexible transaction fees and a low minimum transaction limit Coinmize : Zero-log policy Bitcoin Laundry : Uses stealth pools to anonymize transactions Coin Mixer : Fast payouts 1. Yomix - Excellent customer support Yomix is a btc shuffle service needed to hide your transfers in the bitcoin world. Yomix currently has a minimum withdrawal threshold of 0.03500000 BTC, so users are advised to deposit more than the entry threshold plus commission, otherwise they will not be able to withdraw funds. The client is asked to set 5 exit addresses. If for some reason, even after a delay of two hours, the user’s balance is not updated, the mixer can contact the support service to take action. For customers who have been inactive for several days, it can take up to 15 minutes after logging in before you see outstanding deposits. Transaction histories are automatically deleted within 1 week after that. The program runs on a dedicated server that is openly connected via the Internet (you don’t need to do this when using the Tor browser). The Bitcoin mixer is launched on another machine, all suspicious activity is monitored, and the website is automatically protected in case of any indication that it is under DDoS attack.Yomix supports Bitcoin cryptocurrency bearing no logs policy. It requires a minimum deposit of 0.001 BTC and the transaction fee is 0.5–3%. It supports multiple addresses of up to 10 and requires confirmation. No registration is required and it does offer a referral program. Letter of guarantee is provided.As well as others, Yomix has both a clear-web CryptoMixer. This mixing service is notable for accommodating extremely large-volume transactions. After public verification of their reserve of 2000 BTC there is no doubt that users can trust this mixing service and their cryprocurrencies will not be taken. The number of needed confirmations differs depending on the deposited amount, e.g. for depositing less that 25 BTC there is only 1 confirmation needed, in case of sending more than 1000 BTC a user needs to gather 5 confirmations. To use this platform, a Yomix code needs to be created. A user should note it, so it is easy to use it next time. After entering a CryptoMixer code, users need to provide the output address or several of them and then set a time-delay feature. A delay time is determined automatically and a user can modify it if needed. A service fee can be also selected from the table depending on the sent sum. Each transaction requires additional fee of 0.0005 BTC. Also, a calculator on the main page helps every user to see the amount of crypto money sent and got back after mixing.Yomix offers a good number of features and has a no logs policy. To get started, you’ll need to deposit a minimum of 0.0015 BTC with no transaction fees charged. As an added plus, Yomix supports multiple addresses with a maximum of 5. You won’t have to register to use this service – which is great for those who prize their privacy. However, the site does not offer a referral program. Pros: Has impressive time delaysIt has a positive reputation among the Bitcoin community 2. Bitcoin Mixer - It offers flexible transaction fees and a low minimum transaction limitBitcoin Mixer is one of those mixing services that keep your crypto safe. The platform will take your bitcoin, mix it with other deposits, and give you the same amount of bitcoin in return. It’s designed to reduce bitcoin tracking, “clean” your coins, and help ensure anonymity on the transparent bitcoin network. A bitcoin mixer service like BitMix.Biz will take your bitcoin, then give you different bitcoin in return. The platform collects everyone’s bitcoin deposits, mixes them up into one central account, and then returns the bitcoins to users. You get the same amount of bitcoin (minus a fee), but different bitcoin from different parts of the blockchain. With BitMix.Biz, you get a letter of guarantee. That letter of guarantee is proof of BitMix.Biz’s obligations. When they give you their bitcoin address, they’ll provide a digitally-signed confirmation that this address has genuinely been generated by the server. That letter is always signed from the BitMix.Biz main bitcoin account (that account is publicly available on BitMix.Biz). The platform also uses a special 12 symbol “code” to ensure you get your bitcoin back every time you use the service. You save that code. That code also 100% excludes you from receiving your own coins anytime in the future. With Bitcoin Mixer you will get: Fully Anonymity After your order is invalid, BitMix.Biz will remove any information about your transactions. Absolutely no logs or personality identifying information is kept regarding your use of the BitMix.Biz service. Instant Transfer Money is instantly transferred to your address after your transaction is confirmed. Partner Program Bitcoin Mixer pays users when they refer others to the platform. They’ll pay for every transaction made by an invited user. The platform charges a mining fee of 0.4 to 4%. You can set the fee manually when you’re mixing your bitcoins. The address fee is 0.0005 BTC per output address to cover any transaction fees charged by miners. BitMix.Biz’s mixing process takes up to 24 hours, although it’s usually “almost instant” depending on the current service load. You’re required to mix a minimum of 0.007 BTC and a maximum of 1000 BTC. Transactions outside this range will not be accepted.Bitcoin Mixer will be reliable and easy to use. It has been around for several years and is probably considered one of the most popular mixers on the darknet. Bitcoin Mixer charges a commission randomly in 1-3%, and also provides sending coins to 10 different addresses for increased anonymity. Due to randomization, withdrawal amounts turn out to be unpredictable, which again increases anonymity. BitBlender requires you to create an account to use the full suite of tools, but if you don’t want to register, this mixer offers a “quick blend” mode. When using the Quick Mix feature, you will be sent a code that identifies each individual operation to ensure that you do not receive any previously sent coins back. BitBlender provides two additional features. Auto-Withdrawal and Quick-Withdraw. Auto-Withdrawal will dramatically decrease your runtime if you have to constantly clean your coins. Quick Mix comes in handy for the casual user who doesn’t want to register.Bitcoin Mixer currently only supports Bitcoin mixes, however, it has plans to bring in ETH mixes in the near future. It has been featured on Bitcoin.com/ News BTC/ Crypto News/ The Next Web etc. hence building a bit of trust. Very modern, advanced, user-controlled interface. Allows upto 5 output addresses. Obviously, doesn’t keep any logs whatsoever. The user-control is impressive. You get to control the fund-distribution, as well as the time-delay for each output address manually. Even the fee can be set manually. The cheapest allowed fee is 0.5% which is more than acceptable. The highest is set at 5%. Obviously the 0.25mBTC blockchain transaction fee is attached on top of the selected fee. It even has a “strength meter” which shows how strong your mix is, based on all the factors you’ve selected. No registration required whatsoever. And it does provide the mixing code to ensure all outputs are fresh and not linked to any of your previous deposits.Bitcoin Mixer is one of its kind and requires special mention. It supports Bitcoin cryptocurrency and is clearly unknown on the point of no logs policy. It requires a deposit of at least 0.01 BTC and the transaction fee is 2% along with the 0.0004 BTC network fee. It supports multiple addresses of up to 10 and requires confirmation of 1. No registration is required and it does not offer a referral program. However, the letter of guarantee is provided. Pros: It offers flexible transaction fees and a low minimum transaction limitIt has a positive reputation among the Bitcoin community 3. Coinmize - Zero-log policy Coinmize is a Bitcoin mixing service that provides privacy by using the ‘Bitcoin Mixer 2.0’ algorithm to shuffle bitcoins. Unlike other similar tumbling services that mix your coins with the coins of other users, this platform mixes your crypto with the crypto bought by them directly from the cryptocurrency stock exchanges. Coinmize verifies the newly purchased coins with a scoring system with the help of innovative algorithms and outfoxes such technologies as blockchain volume analysis, cluster analysis, taint analysis, etc. It means that you will receive your BTC back split into random parts, and even at the different addresses if needed. Consequently, your privacy is protected as there is no connection to you. And it takes up to 6 hours to complete your request. Another privacy feature of this mixer service is that it does not require registration and it does not store logs. All the transactions are digitally signed with letters of guarantee that you can check on the website at any moment. They also provide 24/7 technical support. MixTum.io will charge you a 5% Fee from your transaction as well as a network fee of 0.00015 BTC. The platform provides two versions – for Clearnet and Tor browsers.Another solid Bitcoin Tumbler option, Coinmize requires a minimum deposit of 0.01 BTC to be made but makes up for this with a lower transaction fee of 2% coupled with a 0.0004 BTC network fee. Support for multiple addresses and customer options is provided with users required to provide confirmation for only 1 address. While there is no referral program available, Coinmize does offer users with a letter of guarantee for their peace of mind.Mixing Bitcoins is made simpler with Coinmize. A mixer available both on the Clearnet and the Tor network. Offers complete control over the time-delays and fund-distribution. Charges a static fee of 0.3%. Maximum number of output addresses allowed is 10. Each address is charged an additional 0.0001BTC. Largest possible mix is 100 BTC, while smallest accepted deposit is 0.002 BTC. No registration required. Has a No Logs Policy, retains logs for 7-days by default. Although users can delete logs anytime before the 7-day period manually. Does provide Certificate of Origin. Also has an “Instant Dispatch” feature of delivering coins without any delay.How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Coinmize address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address. Pros: Excellent customer support Available in Tor 4. Bitcoin Laundry - Uses stealth pools to anonymize transactions How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Bitcoin Laundry address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.As well as others, Bitcoin Laundry has both a clear-web CryptoMixer. This mixing service is notable for accommodating extremely large-volume transactions. After public verification of their reserve of 2000 BTC there is no doubt that users can trust this mixing service and their cryprocurrencies will not be taken. The number of needed confirmations differs depending on the deposited amount, e.g. for depositing less that 25 BTC there is only 1 confirmation needed, in case of sending more than 1000 BTC a user needs to gather 5 confirmations. To use this platform, a Bitcoin Laundry code needs to be created. A user should note it, so it is easy to use it next time. After entering a CryptoMixer code, users need to provide the output address or several of them and then set a time-delay feature. A delay time is determined automatically and a user can modify it if needed. A service fee can be also selected from the table depending on the sent sum. Each transaction requires additional fee of 0.0005 BTC. Also, a calculator on the main page helps every user to see the amount of crypto money sent and got back after mixing.Bitcoin Laundry is one of the most pocket-friendly, easy to use and customizable Bitcoin laundry platforms in the industry. The user-interface is extremely simple and clean, anyone who has never before used any such service too can navigate around and tumble Bitcoins easily. No registration is required to mix Bitcoins on Blender.io Its “delay” feature lets you set delays from 1-24 hours which increases your anonymity by providing a gap between the deposited coins and the outgoing ones. As for the fee, it’s dynamic, meaning you get to choose the amount of fee you’d like to pay, the minimum fee being 0.5% and the maximum being 2.5% with an additional 0.0005%/address. It’s also one of the rare platforms which provides you with a mixing code which makes sure your previous coins do not get mixed with your newer deposits if you do multiple deposits to the tumbler. The minimum amount you can mix is 0.001BTC while there’s no specific maximum amount as their Bitcoin reserve seems to be quite large. It also has a No Logs Policy and all data is instantly deleted as soon as a transaction is complete; and as for the number of confirmations required it’s 3 for your deposit to be mixed by Bitcoin Laundry It supports 8 addresses for each mix so you can further increase your anonymity. In a nutshell, it gives you the power to choose, is fast, anonymous and totally worth a try. It also supports Segwit and bech32 Addresses, with some terms attached. For e.g. only witness version bech32 addresses are supported. Similarly, only the addresses starting with the number “3” are supported.Bitcoin Laundry supports Bitcoin and Litecoin cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.015 LTC and the transaction fee is from 0.4% to 4% + mining fee 0.0003 for BTC, from 2% to 20% + mining fee 0.0003 for LTC. It supports multiple addresses of up to 5 and requires confirmation from 1 till 6. No registration is required and it does offer a referral program as well as a letter of guarantee. Pros: No-logs policiNo logs 5. Coin Mixer - Fast payouts Being honest, this isn’t the most feature-rich or control-rich Coin Mixer mixer that’s available out there. However, it still averages mixes over 700Bitcoin/day (claimed, not verified). The coins are claimed to be sourced from mining pools in the U.S, China and Europe. Obviously they do not keep any logs. Unfortunately, only 1 output address is allowed which is a bit of a downer. The time-delay can fully be set manually. It can be as low as 0 hours, or as high as 48 hours. Any other delay between this frame can be set using the provided slider. The fee isn’t randomized, neither is it user-controlled. It’s set at a solid 0.1% for all transactions. Accepts a minimum Bitcoin deposit of 0.010BTC. Maximum funds which can be currently mixed stand at 677 BTC. Number of required confirmations depend on the amount. Only 1 is required for mixes below 2.5BTC. For 25 BTC it needs 3 confirmations. 4 confirmations for 40BTC and 5 confirmations for 50 BTC are required respectively. Doesn’t require registrations.Coin Mixer is one of the most pocket-friendly, easy to use and customizable Bitcoin laundry platforms in the industry. The user-interface is extremely simple and clean, anyone who has never before used any such service too can navigate around and tumble Bitcoins easily. No registration is required to mix Bitcoins on Blender.io Its “delay” feature lets you set delays from 1-24 hours which increases your anonymity by providing a gap between the deposited coins and the outgoing ones. As for the fee, it’s dynamic, meaning you get to choose the amount of fee you’d like to pay, the minimum fee being 0.5% and the maximum being 2.5% with an additional 0.0005%/address. It’s also one of the rare platforms which provides you with a mixing code which makes sure your previous coins do not get mixed with your newer deposits if you do multiple deposits to the tumbler. The minimum amount you can mix is 0.001BTC while there’s no specific maximum amount as their Bitcoin reserve seems to be quite large. It also has a No Logs Policy and all data is instantly deleted as soon as a transaction is complete; and as for the number of confirmations required it’s 3 for your deposit to be mixed by Coin Mixer It supports 8 addresses for each mix so you can further increase your anonymity. In a nutshell, it gives you the power to choose, is fast, anonymous and totally worth a try. It also supports Segwit and bech32 Addresses, with some terms attached. For e.g. only witness version bech32 addresses are supported. Similarly, only the addresses starting with the number “3” are supported.Coin Mixer is a very impressive service if you want to maintain your anonymity when you make purchases online. It can also be useful if you want to do p2p payments and donations. The service is used to mix a person’s funds and give this person some fresh bitcoins. The focus here is on making sure that the blender has the ability to confuse the trail as somebody could try to figure out the source. The best mixer is that one that keeps your anonymity at a max. You want each bitcoin transaction to be very hard to trace. This is where using our bitcoin mixing service makes a lot of sense. Protect your income and personal information becomes much easier. The reason why you want to use our service is because you want to hide your coins from hackers and third-parties. They can do a blockchain analysis, they may be able to track your personal data to steal your bitcoins. With our bitcoin tumbler, you don’t have to worry about that anymore.Coin Mixer is unique in the sense that it offers support for both Bitcoin and Ethereum. The site does not require registration and has a minimum deposit requirement of 0.2 BTC. Transaction fees range from 2 – 5% depending on the amount that is being transferred. There is no referral program offer for Coin Mixer and multiple addresses are not supported. Finally, letters of guarantee are not provided. Pros: Provides user-controlled time delays Excellent customer support

  • Kommentar-Link Rodneyskync Montag, 28 April 2025 00:29 gepostet von Rodneyskync

    В сфере оптимизации сайта под поисковые системы (SEO) существует множество терминов и понятий, важных для продвижения. Ссылочный вес или ссылочная масса — один из важнейших факторов, влияющих на ранжирование веб-проекта в результатах поиска. В этой статье мы кратко рассказываем, что представляет собой ссылочная масса, какие ее типы выделяют, как она формируется и влияет на рейтинг сайта, а также даем несколько советов о ее наращивании.
    ссылочная масса
    Что такое ссылочная масса сайта
    Ссылочный профиль (масса, вес) — это совокупность всех внешних гиперссылок, которые указывают на определенный сайт. Чем больше качественных внешних ссылок указывают на веб-ресурс, тем выше его авторитет с точки зрения поисковых систем. Поэтому внутренние ссылки, то есть оставленные в пределах самого сайта, ведущие на него же, не являются частью ссылочной массы.
    ссылочная масса
    ссылочная масса

Schreibe einen Kommentar

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.