user_mobilelogo
Facebook
Dienstag, 30 Mai 2017 12:12

Bild des Monats Mai - "Sonnenuntergang in Berlin"

Bild des Monats Mai - "Sonnenuntergang in Berlin"

Manchmal muss man einfach an einen bereits bekannten Spot zurückkehren, um ein völlig anderes Bild zu machen als bei einem vorherigen Besuch. Das Bild des Monats im Monat Mai ist vom gleichen Spot aus enstanden wie das Bild des Monas März, zeigt jedoch eine völlig andere Stimmung und gibt euch einen Einblick in diverse Techniken, die ich nutze, um meine Ergebnisse zu erzielen. In diesem Beitrag geht es um die Kombination zweier Aufnahmen, um eine möglichst gleichmäßige Belichtung zu erzielen, ohne dabei auf Techniken wie HDR zurückgreifen zu müssen.


Einführung

Als Landschaftsfotograf ist man inzwischen mehr oder weniger an die Nachbearbeitung gefesselt. Das meine ich überhaupt nicht negativ, im Gegenteil, es macht Spaß mit LR/PS noch das letzte aus den Bildern raus zu kitzeln. Auch wenn natürlich manche Dinge noch spontan im Workflow entstehen, sollte man die groben Schritte der Bearbeitung aber schon beim Aufnehmen des Bildes im Kopf haben. Hinterher irgendwie an den Reglnern schieben bis es passt kann zwar funktionieren, zeugt aber wenig von zielorientiertem Arbeiten. Gleichzeitig ist man als Fotograf aber immer abhängig vom Licht, d.h. man kann zwar zuhause den Spot planen, den Wetterbericht prüfen und die Ausrüstung entsprechend gestalten, aber wenn vor Ort das Licht nicht zu dem passt, was man sich vorgestellt hat, muss man flexibel sein oder es eben sein lassen.


Planung

Ich versuche in der Regel die Aufnahmen so gut es geht vorher zu planen. Gerade bei Sonnenuntergängen ist das aber äußerst schwierig, da kleinste Wolken darüber entscheiden können, ob der Himmel blutrot oder einfach graublau wird. In Berlin hat man im Frühling/Sommer leider oft das Problem, dass in Brandenburg Gewitter ist, während man in der Stadt blauen Himmel vorfindet. Als Resultat hängen am Horizont oft dicke Wolken, die in der Stadt den Sonnenuntergang ruinieren. :D Der Wetterbericht sah aber denkbar gut aus dieses mal, warm, trocken und kleinere Wölkchen am Himmel, perfekte Bedingungen für eine gelungene Aufnahme zum Sonnenuntergang. Mit TPE (hier ein Video von uns dazu) ermittelte ich den Stand der Sonne zum Zeitpunkt des Untergangs, der inzwischen deutlich weiter rechts (vom Spot aus gesehen) liegt, als noch vor 2 Monaten als dieses Bild entstanden ist (logisch, die Tage werden länger ;)).

  • tpe

Vor Ort

Mit 5DM3, 17-40 f4.0 L, Polfilter und 64x ND-Filter bewaffnet erreichte ich schließlich das Ziel und traf dort direkt auf Mitstreiter. Enttäuscht mussten wir leider feststellen, dass Brandenburg mal wieder zugeschlagen hatte und die gerade untergehende Sonne sich hinter einem schmalen Wolkenband befand. Aber wie hat ein gewisser Herr Jaworkskyj schon gesagt: Oft sind es die 15 Minuten NACH dem Sonnenuntergang, die entscheidend sind. Dies sollte sich auch hier bewahrheiten, nur dass es 15 Minuten gedauert hat, bis es überhaupt wieder brauchbares Licht gab. Die schon hinterm Horizont verschwundene Sonne färbte den Himmel samt Wolken wieder angenehm rot. Für die tiefer stehenden Wolken im Vordergrund reichte es nicht auf Grund des oben erwähnten Wolkenbandes.

Das Helligkeitsgefälle zwischen Himmel und Stadt war inzwischen deutlich größer geworden. Es ist nicht möglich gewesen mit einer einzelnen Belichtung den gesamten Dynamikumfang abzubilden. Natürlich wäre es möglich gewesen ein HDR vorzubereiten mit einer ganzen Belichtungsserie. Dies erschien mir aber auch wieder nicht sinnvoll, da erstens der Himmel gut aussah, wie er war, und zweitens lediglich die Stadt im Vordergrund etwas mehr Licht benötigte. Ich habe mich daher relativ spontan dafür entschieden nur 2 Aufnahmen zu machen, eine für den Himmel, eine für die Stadt und diese später durch simples Maskieren in Photoshop zu kombinieren. Der grobe Bearbeitungsplan stand zu diesem Zeitpunkt aber schon fest, so dass ichh meine Aufnahmen gezielt an meinen Plan anpassen konnte.


Die Rohaufnahmen

Die Ausrüstung viel entgegen aller Erwartungen auch sehr übersichtlich aus. Den ND-Filter habe ich aus mehreren Gründen direkt wieder eingepackt:

  1. Der rote Teil des Himmels war auf Grund der Wolkenlage ohnehin schon "schlierig" genug.
  2. Die kleinen dunklen Wolkenfetzen bieten mir in ihrer Struktur wesentlich mehr Dramatik, als graue Schleier, die nur das rot verdecken.

Auch der Polfilter blieb in der Tasche, denn:

  1. Das Licht traf fast frontal auf die Linse, die Auswirkungen des Polfilters sind dann überschaubar.
  2. Bei der Einstellung, wo er tatsächlich was am Himmel bewegt hätte, wären sämtliche Reflektionen auf dem Wasser weg gewesen. Diese sind mir aber sehr wichtig gewesen, da sie an dieser Stelle noch einmal angenehmes Licht ins Bild bringen und somit eine führende Linie zum Berliner Dom bilden.

Beide Aufnahmen sind im M-Modus entstanden. Die ISO habe ich auf 50 gestellt, Blende 8 für durchgehende Schärfe. Die Aufnahme für den Himmel ist mit 1s Verschlusszeit entstanden, die für die Stadt und die Straße mit 5s. Die perspektive erlaubte 17mm ohne große Verzerrungen, auch weil ich mich bemüht habe, den Fernsehturm nicht an den Bildrand zu quetschen, wo die Verzerrungen am größten sind.

  • 842A5828_orig
  • 842A5829_orig

 

Die Bearbeitung

Eine erste RAW-Entwicklung habe ich bereits in LR vollzogen. Insbesondere ist mir wichtig gleich am Anfang CAs zu korrigieren. Das 17-40 ist eine schöne Linse, aber man sieht oft deutliche Farbsäume und so ist auch hier der Fernsehturm nicht verschont geblieben. Später lassen sich die CAs sehr viel schlechter korrigieren, da sie durch zusätzliche Filter nicht mehr so eindeutig identifizierbar sind. Daher werden solche grundlegenden Dinge in meinem Workflow gleich am Anfang erledigt. Ansonsten wurde in der ersten Entwicklung lediglich der Kontrast optimiert über eine Kombination aus Tiefen/Lichter und Schwarz/Weiß Reglern, wie ich sie auch in diesem Video beschreibe.

{twenty}image1=2017/2017_05_29_BDM_Mai/01_orig/842A5828_orig.jpg|image2=2017/2017_05_29_BDM_Mai/02_raw1/842A5828.jpg{twenty} {twenty}image1=2017/2017_05_29_BDM_Mai/01_orig/842A5829_orig.jpg|image2=2017/2017_05_29_BDM_Mai/02_raw1/842A5829.jpg{twenty}


Maskierung

Alle weiteren Schritte erfolgten dann in Photoshop. Das schwierigste war es eine gute Auswahl zu erzeugen, auf deren Basis dann die Layermaske entstehen konnte, um die korrekt belichtete Stadt in den korrekt belichteten Himmel zu blenden. Ich habe dabei auf die Kanäle zurückgegriffen und auf Basis des Blau-Kanals und Tonwertkorrekturen die grundlegende Auswahl gebaut, die durch etwas Verkleinern und mit weichem Rand perfektioniert wurde. Angewendet auf den Stadt-Layer ergab sich ein bereits ansehnliches Ergebnis.

  • blaukanal
  • maskiert
  • maskierung

 

NIK ColorEfex

Für etwas mehr Wärme und noch ein wenig Kontrast nutzte ich dann die Nik Color Efex, speziell Warmth/Brilliance und den Detail Extractor. Ich habe mir grundsätzlich angewöhnt den dadurch entstehenden Layer sofort auf 50% Deckkraft zu stellen, um damit den Effekt zu halbieren. Anschließend verlasse ich für mindestens 10 Minuten den Bildschirm und nur wenn ich beim Zurückkehren denke, dass es zu wenig ist, stelle ich die Deckkraft höher. Das verhindert bei mir sehr gut, dass ich es mit den Effekten übertreibe.
{twenty}image1=2017/2017_05_29_BDM_Mai/03_maske/maskiert.jpg|image2=2017/2017_05_29_BDM_Mai/04_nik/842A5829_nik.jpg{twenty}

 

Farbgebung durch Verlaufsumsetzung

Für etwas mehr Lila am rechten Bildrand, der ja sowieso etwas dunkler ausfällt, nutze ich eine Verlaufsumsetzung, die mit einer Layermaske und Gradienten wirklich nur in der Ecke rechts unten angewendet wird. Der Effekt bewirkt, dass die Farbgebung auf der Straße und den hellen Gebäuden deutlich weniger grün wird, was mehr dem Gesamteindruck des Bildes entspricht.
{twenty}image1=2017/2017_05_29_BDM_Mai/04_nik/842A5829_nik.jpg|image2=2017/2017_05_29_BDM_Mai/05_verlauf/842A5829_verlauf.jpg{twenty}

 

Schärfen

Danach erfolgte eine Schärfung per Hochpassfilter. Zum Schärfen gibt es ja sehr eigene Philosophien, ich persönlich finde die Hochpassschärfung nach wie vor absolut brilliant, da sie quasi den "Maskieren"-Regler aus Lightroom automatisch beinhaltet. Wichtig auch hier wieder: Mit Bedacht vorgehen, nicht überschärfen!
{twenty}image1=2017/2017_05_29_BDM_Mai/05_verlauf/842A5829_verlauf.jpg|image2=2017/2017_05_29_BDM_Mai/06_scharf/842A5829_scharf.jpg{twenty}

 

Letzter Schliff

Den Abschluss bildete eine weitere RAW-Entwicklung, bei der aber lediglich Teile im Bild per Korrekturpinsel mehr betont wurden. Dies erfolgte mit einem weichen Pinsel, für den die Belichtung um eine halbe Blendenstufe erhöht wurde.
{twenty}image1=2017/2017_05_29_BDM_Mai/06_scharf/842A5829_scharf.jpg|image2=2017/2017_05_29_BDM_Mai/07_raw2/842A5829_licht.jpg{twenty}

 

Abschluss

Wer unseren Blog regelmäßig liest, dem ist vermutlich aufgefallen, dass das Bild des Monats März aus identischer Perspektive gemacht wurde. Damals lag der Fokus aber wesentlich mehr auf fotografischen Effekten, während es dieses mal hauptsächlich um Techniken der Nachbearbeitung ging. Für kommende Beiträge aus dieser Serie werde ich aber wieder auf andere Locations zurückgreifen :)

  • 842A5829_final

Dir gefällt was du siehst? Dann zwitschere uns weiter oder like uns auf Facebook

57125 Kommentare

  • Kommentar-Link +7 (499) 460-69-87 Dienstag, 29 April 2025 06:54 gepostet von +7 (499) 460-69-87

    Индивидуальный пошив штор, закажите..
    Создайте уникальный интерьер с пошивом штор, по доступным ценам..
    Эксклюзивные решения в пошиве штор, по индивидуальному проекту..
    Дизайнерские шторы на заказ, закажите онлайн..
    Пошив штор с доставкой, по вашим требованиям..
    Лучшие ткани для пошива штор, по индивидуальному заказу..
    Создаем шторы мечты, Пускай ваш дом засияет..
    Пошив штор на заказ, от ведущих мастеров..
    Пошив штор из эксклюзивных тканей, по индивидуальному проекту..
    Пошив штор с индивидуальным подходом, оформляйте заказ онлайн..
    Пошив штор высокого качества, по вашему дизайну..
    Пошив штор на заказ по вашим размерам, подходящий ваш стиль..
    Индивидуальный стиль ваших окон, по разумной цене..
    Индивидуальный дизайн штор, по вашим требованиям..
    Пошив штор для любого помещения, с современными технологиями..
    Профессиональный пошив штор, с гарантией долговечности..
    Создаем шторы, которые преобразят ваш интерьер, от замеров до монтажа..
    пошив штор пошив штор . "Ткацкий"

  • Kommentar-Link Jamesbor Dienstag, 29 April 2025 06:14 gepostet von Jamesbor

    Ethereum bitcoin mixer is one of the few that allows large-volume transactions. The minimum size for a mixing operation is 0.001 BTC, any amount below this level is considered a donation and is not sent back to the client, there is no maximum transfer limit. The minimum commission is 0.5% with an additional fee of 0.0005 BTC for each incoming transaction. During the transaction, you will receive a letter of guarantee, as in all previously mentioned mixers. Yomix : Fast payouts Coinmize : Zero-log policy Bitcoin Laundry : Uses stealth pools to anonymize transactions Bitcoin Mixer : It offers flexible transaction fees and a low minimum transaction limit Mixero : Excellent customer support 1. Yomix - Fast payouts Yomix is a Bitcoin mixer that processes Bitcoin and Bitcoin Cash transactions. The site offers a referral program for new users and supports multiple recipient addresses. Transaction fees start at 0.5% plus an extra 0.0001 BTC for each extra address added.Yomix has a Bitcoin reserve of its own, consider it a chain of Bitcoins, when you send your BTC to Blender.io it sends your coins to the end of the chain and sends you fresh, new, unlinked coins from the beginning of the chain. Hence there’s no link between the coins going in, and the coins coming out. Hence the public ledger would only be able to track the coins going from your wallet to the address of Blender.io but no further. Blender.io doesn’t require you to signup, register, or provide any kind of detail except the “receiving address”! That’s the only thing it needs, there can’t be a better form of anonymity if you ask me. Since you provide no personal details, there’s no way your identity can be compromised. Nor can it be linked back to you, since Yomix doesn’t know who you are. Blender.io is one of the most accommodating tumblers in this sense as well, most other tumblers offer 3-4 sets of delays, Blender.io offers as many as 24, yes one for each hour. It also lets you add as many as 8 new addresses for each transaction (most other tumblers allow no more than 5 addresses).Yomix offers a good number of features and has a no logs policy. To get started, you’ll need to deposit a minimum of 0.0015 BTC with no transaction fees charged. As an added plus, Yomix supports multiple addresses with a maximum of 5. You won’t have to register to use this service – which is great for those who prize their privacy. However, the site does not offer a referral program.An interesting cryptocurrency tumbler is Yomix. It supports bitcoin and Ethereum cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.2 BTC and the transaction fee is 2–5%. It does not support multiple addresses and requires 6 confirmations. No registration is required and it does not offer a referral program. Pros: Available in Tor Uses stealth pools to anonymize transactions 2. Coinmize - Zero-log policy The principle of operation of the resource is that Coinmize sends coins of all users to a single account, mixes them, and then distributes coins to users. You get the same amount (minus commission) of already cleared bitcoins, including several from different parts of the blockchain. Which makes it almost impossible to analyze it. The mixer also sends you a letter of guarantee. This letter of guarantee is a confirmation of the obligations of BitMix biz and that the service has generated an address for the user to send. This email is always signed from the main bitcoin account Coinmize (publicly available at BitMix biz). The service also uses a unique code of 12 characters, after that, this user will never receive exactly his own coins back. Save this code it will be needed for the affiliate program. BitMix biz includes an affiliate program and pays users when they bring other users to the platform. You will receive a fee for every transaction you refer to. BitMix biz’s robust privacy policy is backed by several points: No registration and identity verification required. Transaction history is deleted after 72 hours. The randomization function makes the analysis of the protocol more difficult. Tor browser support.Coinmize is one of the best Bitcoin Tumbler services, that I’m stating based on my personal experiences and the positive reviews of other users on the Internet. It works both as a Bitcoin Tumbler, as well as a swapper, meaning you can clean your coins, and receive them in a different cryptocurrency as well which further adds to their anonymity. As a Bitcoin Tumbler, they let you set a custom service fee, the higher this fee is, the better your coins are anonymized. There’s a time-delay option as well which let’s you add an extra layer of protection by delaying your transaction by up to 24 hours, so you receive your coins not instantly but at a later time set by you. As of now, it supports the following coins: Bitcoin Ethereum Bitcoin Cash Litecoin The minimum fee of mixing coins for Bitcoin is 0.8% + 0.0008BTC / forwarding address. Note that there is a minimum transaction limit of 0.01BTC/transaction, and anything below that limit is still accepted but considered “donations” and hence isn’t returned to the senders. As for confirmation, it needs 1 confirmation before it cleans your Bitcoins. And the time needed for the whole process is generally instant, except when you’ve manually specified a time-delay. Also, obviously there also is a “Guarantee certificate” which helps you resolve any future conflicts and issues. It also features a “no logs policy” like all the other Bitcoin Tumbler services on this list, and automatically deletes your order history and all the other data after 24 hours. Well, this is just one of the many available Bitcoin Tumbler services, so let’s head over to the other available options.Coinmize is a very impressive service if you want to maintain your anonymity when you make purchases online. It can also be useful if you want to do p2p payments and donations. The service is used to mix a person’s funds and give this person some fresh bitcoins. The focus here is on making sure that the blender has the ability to confuse the trail as somebody could try to figure out the source. The best mixer is that one that keeps your anonymity at a max. You want each bitcoin transaction to be very hard to trace. This is where using our bitcoin mixing service makes a lot of sense. Protect your income and personal information becomes much easier. The reason why you want to use our service is because you want to hide your coins from hackers and third-parties. They can do a blockchain analysis, they may be able to track your personal data to steal your bitcoins. With our bitcoin tumbler, you don’t have to worry about that anymore.Coinmize has a simple interface, it is easy to use and simple. Time-delay option can be set up to 24 hours. With regard to the fee, there is an additional fee of 0.0005 % per output address. As one of the few, this cryptocurrency tumbler provides a user with a special mixing code which guarantees that fresh crypto coins are not blended with previous deposits. Additional URL Blender is also here to guarantee that users can get to the tumbler, even if the main link is not working. Pros: It has a positive reputation among the Bitcoin communityProvides user-controlled time delays 3. Bitcoin Laundry - Uses stealth pools to anonymize transactions Bitcoin Laundry bitcoin mixer is one of the few that allows large-volume transactions. The minimum size for a mixing operation is 0.001 BTC, any amount below this level is considered a donation and is not sent back to the client, there is no maximum transfer limit. The minimum commission is 0.5% with an additional fee of 0.0005 BTC for each incoming transaction. During the transaction, you will receive a letter of guarantee, as in all previously mentioned mixers.Bitcoin Laundry supports Bitcoin cryptocurrency bearing no logs policy. It requires a minimum deposit of 0.001 BTC and the transaction fee is 0.5–3%. It supports multiple addresses of up to 10 and requires confirmation. No registration is required and it does offer a referral program. Letter of guarantee is provided.What marks Bitcoin Laundry out from the crowd is the fact that this crypto mixer is able to process transactions for Bitcoin and Litecoin. There is a minimum deposit requirement for both Bitcoin and Litecoin. The site is able to support a maximum of 5 multiple addresses with confirmation required for all addresses. No site registration is required and there is a referral program in place. Additionally, Bitcoin Laundry can provide clients with a letter of guarantee.Bitcoin Laundry is one of its kind and requires special mention. It supports Bitcoin cryptocurrency and is clearly unknown on the point of no logs policy. It requires a deposit of at least 0.01 BTC and the transaction fee is 2% along with the 0.0004 BTC network fee. It supports multiple addresses of up to 10 and requires confirmation of 1. No registration is required and it does not offer a referral program. However, the letter of guarantee is provided. Pros: Customizable mixing settings for better anonymity24/7 customer support 4. Bitcoin Mixer - It offers flexible transaction fees and a low minimum transaction limitBitcoin Mixer is unique in the sense that it offers support for both Bitcoin and Ethereum. The site does not require registration and has a minimum deposit requirement of 0.2 BTC. Transaction fees range from 2 – 5% depending on the amount that is being transferred. There is no referral program offer for Bitcoin Mixer and multiple addresses are not supported. Finally, letters of guarantee are not provided.Bitcoin Mixer is one of its kind and requires special mention. It supports Bitcoin cryptocurrency and is clearly unknown on the point of no logs policy. It requires a deposit of at least 0.01 BTC and the transaction fee is 2% along with the 0.0004 BTC network fee. It supports multiple addresses of up to 10 and requires confirmation of 1. No registration is required and it does not offer a referral program. However, the letter of guarantee is provided.Compared to other Bitcoin tumblers, Bitcoin Mixer stands out from the crowd thanks to the additional anonymity offered. Users are given the option to split and merge coins into different wallets to various addresses. Additionally, Bitcoin Mixer provides support for unlimited addresses and does not require user registration. Although only Bitcoin is supported and there are no referral programs, ChipMixer does not charge users with any service fees. With the option to donate BTCs being made available.Grams itself is a brand on the Darknet so I believe not much needs to be said about it. Grams Helix is one of its subsidiaries and is one of the most reputed and widely used Bitcoin Mixer services out there, it’s simple, modern, and definitely trustworthy. Grams supports only Bitcoins for now. It needs 2 confirmations before it cleans and sends you your coins. It obviously supports time-delay, but it’s automatically set to “2 hours” for some reasons. It also supports “Random transactions” for the deposit, the deposit address changes after each transaction and allows you to send more than 1 transactions to Grams Helix instead of sending in all your coins in a single go. The same is also supported for the “output addresses” (where you receive coins) and you can input as many as 5 different BTC addresses where your coins are sent after cleaning them. The coin-deposit address is valid for 8 hours, and any transaction not done within these 8 hours won’t be received by the platform. Pros: Excellent customer support It offers flexible transaction fees and a low minimum transaction limit 5. Mixero - Excellent customer support It is one of the best tumblers with a good number of features. It supports Bitcoin cryptocurrency bearing no logs policy. It requires a minimum deposit of 0.0015 BTC and the transaction fee is 0.0% service fee along with an additional 0.0002 BTC per payout address. It supports multiple addresses of up to 5 and requires confirmation. No registration is required and Mixero does not offer a referral program.Mixero offers a good number of features and has a no logs policy. To get started, you’ll need to deposit a minimum of 0.0015 BTC with no transaction fees charged. As an added plus, Mixero supports multiple addresses with a maximum of 5. You won’t have to register to use this service – which is great for those who prize their privacy. However, the site does not offer a referral program.Mixero is another one that requires consideration. It supports Bitcoin cryptocurrency bearing no logs policy. It requires a minimum deposit of 0.001 BTC and the transaction fee is 4–5%. It supports multiple addresses of 2 or custom options and requires confirmation. No registration is required and it does not offer a referral program. Letter of guarantee is offered.What marks Mixero out from the crowd is the fact that this crypto mixer is able to process transactions for Bitcoin and Litecoin. There is a minimum deposit requirement for both Bitcoin and Litecoin. The site is able to support a maximum of 5 multiple addresses with confirmation required for all addresses. No site registration is required and there is a referral program in place. Additionally, Mixero can provide clients with a letter of guarantee. Pros: Excellent customer support Extensive FAQ section

  • Kommentar-Link Ткацкий Dienstag, 29 April 2025 02:19 gepostet von Ткацкий

    Пошив штор на любой вкус, качественный пошив штор..
    Пошив штор для вашего дома, по доступным ценам..
    Эксклюзивные решения в пошиве штор, по индивидуальному проекту..
    Дизайнерские шторы на заказ, звоните сейчас..
    Быстрый пошив штор, по вашим требованиям..
    Мастерская по пошиву штор, по индивидуальному заказу..
    Дизайнерские шторы на любой интерьер, Пускай ваш дом засияет..
    Шторы на любой вкус и цвет, от ведущих мастеров..
    Пошив штор из эксклюзивных тканей, для элитных интерьеров..
    Выберите качественный пошив штор, оформляйте заказ онлайн..
    Пошив штор высокого качества, по лучшим ценам..
    Пошив штор на заказ по вашим размерам, подходящий ваш стиль..
    Элегантные шторы на заказ, по разумной цене..
    Уникальные шторы с пошивом на заказ, по вашим требованиям..
    Пошив штор для любого помещения, подчеркивающих ваш стиль..
    Лучшие ткани для пошива штор, от лучших мастеров..
    Индивидуальные шторы на заказ, с бесплатной консультацией..
    пошив штор пошив штор . "Ткацкий"

  • Kommentar-Link Ткацкий Montag, 28 April 2025 19:16 gepostet von Ткацкий

    Лучшие шторы для спокойствия и уюта, создайте уют, подбираем шторы для загородного дома, эстетика и комфорт, максимальная функциональность, современные материалы для штор, шторы для приватности, стильные решения для штор, выбираем шторы для загородной гостиной, уникальные идеи штор для загородных фасадов, шторы из натуральных тканей, удобные системы управления шторами, подбираем шторы под интерьер, декор и оформление окон в загородном доме, обеспечьте комфорт с нашими шторами, выбор стильных штор для загородного дома, что выбрать для загородного дома, создайте уют с помощью уникальных штор, шторы для зимнего уюта в загородном доме
    шторы в загородном доме шторы в загородном доме .

  • Kommentar-Link +7 (499) 460-69-87 Montag, 28 April 2025 14:35 gepostet von +7 (499) 460-69-87

    Лучшие шторы для спокойствия и уюта, используя шторы, подбираем шторы для загородного дома, эстетика и комфорт, максимальная функциональность, экологичные шторы для дома, шторы для приватности, идеи дизайна штор, выбираем шторы для загородной гостиной, уникальные идеи штор для загородных фасадов, шторы из натуральных тканей, современные механизмы для штор, подбираем шторы под интерьер, украшение окон штором, создайте атмосферу с подходящими шторами, лучшие идеи для оформления окон, плюсы и минусы разных видов штор, используйте шторы для зонирования пространства, подбираем шторы под сезон
    шторы в загородном доме шторы в загородном доме .

  • Kommentar-Link HaroldSpide Montag, 28 April 2025 14:33 gepostet von HaroldSpide

    Manuala metode
    Manuala FUE procedura tiek izmantots tikai roku darbs, graftus atdalot ar instrumentu, kura diametrs ir 0.9-1.00 mm. Parstadits tiek viss grafts, kas parasti satur 1-4 matu folikulus, nedalot atseviski pa 1 graftam, tadejadi iegustot kuplu un dabigu rezultatu.
    ТРАНСПЛАНТАЦИЯ ВОЛОС ДЛЯ МУЖЧИН
    Dr. Ilze Runce veicot griezienus, strada ar mikroskopu, kas dod iespeju iegut matu biezumu, kas maksimali pietuvinats dabigajam un viena procedura iespejams parstadit lidz pat 4000 graftu. Manuala FUE metode tiek izmantota ari uzacu un bardas parstadisana. Procedura norit vieteja anestezija un ir klientam komfortabla – tas laika pacients visu laiku atrodas sedus stavokli proceduru kresla un var lietot datoru, telefonu, planseti, lasit gramatu vai skatities TV.

    Dr. Ilze Runce ir manualas metodes aizsaceja Latvija, ir atseviski apguvusi so metodi Kazahstana 1 gada garuma pie nozares profesionaliem un ieviesusi to Latvija kops 2013.gada, kopuma ir veikusi jau vairak ka 1000 manualas FUE proceduras.

    Aprakstu sagatavoja Dr. Ilze Runce

    Manualas metodes cena ieklauts viss nepieciesamais:
    nepieciesamais graftu daudzums;
    visi pecoperacijas medikamenti;
    sprejs;
    sampuns;
    cepurite;
    pusdienas proceduras diena;
    parsiesana nakamaja diena (pec nepieciesamibas).
    MATU IZKRISANA

    Pastiprinata matu izkrisana jeb alopecija skar gan viriesus, gan sievietes. Ta var but saistita ar novecosanos, genetiku, hroniskam slimibam, ieilgusu stresu, ka ari specifiskam imunas sistemas reakcijam. Mati klust plani vai pilniba izkrit. Ari retas un apdegumi zonas, kur agrak ir bijis apmatojums, (piemeram, uzacis) var radit estetisku diskomfortu.

    Matu parstadisanas procedura ir efektivs risinajums gadijumos, kad medikamenti un arstnieciskas proceduras nepalidz!

  • Kommentar-Link Rodneyskync Montag, 28 April 2025 10:37 gepostet von Rodneyskync

    В сфере оптимизации сайта под поисковые системы (SEO) существует множество терминов и понятий, важных для продвижения. Ссылочный вес или ссылочная масса — один из важнейших факторов, влияющих на ранжирование веб-проекта в результатах поиска. В этой статье мы кратко рассказываем, что представляет собой ссылочная масса, какие ее типы выделяют, как она формируется и влияет на рейтинг сайта, а также даем несколько советов о ее наращивании.
    ссылочная масса
    Что такое ссылочная масса сайта
    Ссылочный профиль (масса, вес) — это совокупность всех внешних гиперссылок, которые указывают на определенный сайт. Чем больше качественных внешних ссылок указывают на веб-ресурс, тем выше его авторитет с точки зрения поисковых систем. Поэтому внутренние ссылки, то есть оставленные в пределах самого сайта, ведущие на него же, не являются частью ссылочной массы.
    ссылочная масса
    ссылочная масса

  • Kommentar-Link Прокарниз Sonntag, 27 April 2025 20:01 gepostet von Прокарниз

    Автоматические жалюзи с мотором: комфорт и безопасность
    моторизированные жалюзи моторизированные жалюзи . Prokarniz

  • Kommentar-Link HaroldSpide Sonntag, 27 April 2025 15:07 gepostet von HaroldSpide

    Manuala metode
    Manuala FUE procedura tiek izmantots tikai roku darbs, graftus atdalot ar instrumentu, kura diametrs ir 0.9-1.00 mm. Parstadits tiek viss grafts, kas parasti satur 1-4 matu folikulus, nedalot atseviski pa 1 graftam, tadejadi iegustot kuplu un dabigu rezultatu.
    Matu atjaunosana
    Dr. Ilze Runce veicot griezienus, strada ar mikroskopu, kas dod iespeju iegut matu biezumu, kas maksimali pietuvinats dabigajam un viena procedura iespejams parstadit lidz pat 4000 graftu. Manuala FUE metode tiek izmantota ari uzacu un bardas parstadisana. Procedura norit vieteja anestezija un ir klientam komfortabla – tas laika pacients visu laiku atrodas sedus stavokli proceduru kresla un var lietot datoru, telefonu, planseti, lasit gramatu vai skatities TV.

    Dr. Ilze Runce ir manualas metodes aizsaceja Latvija, ir atseviski apguvusi so metodi Kazahstana 1 gada garuma pie nozares profesionaliem un ieviesusi to Latvija kops 2013.gada, kopuma ir veikusi jau vairak ka 1000 manualas FUE proceduras.

    Aprakstu sagatavoja Dr. Ilze Runce

    Manualas metodes cena ieklauts viss nepieciesamais:
    nepieciesamais graftu daudzums;
    visi pecoperacijas medikamenti;
    sprejs;
    sampuns;
    cepurite;
    pusdienas proceduras diena;
    parsiesana nakamaja diena (pec nepieciesamibas).
    MATU IZKRISANA

    Pastiprinata matu izkrisana jeb alopecija skar gan viriesus, gan sievietes. Ta var but saistita ar novecosanos, genetiku, hroniskam slimibam, ieilgusu stresu, ka ari specifiskam imunas sistemas reakcijam. Mati klust plani vai pilniba izkrit. Ari retas un apdegumi zonas, kur agrak ir bijis apmatojums, (piemeram, uzacis) var radit estetisku diskomfortu.

    Matu parstadisanas procedura ir efektivs risinajums gadijumos, kad medikamenti un arstnieciskas proceduras nepalidz!

  • Kommentar-Link Rodneyskync Sonntag, 27 April 2025 13:14 gepostet von Rodneyskync

    В сфере оптимизации сайта под поисковые системы (SEO) существует множество терминов и понятий, важных для продвижения. Ссылочный вес или ссылочная масса — один из важнейших факторов, влияющих на ранжирование веб-проекта в результатах поиска. В этой статье мы кратко рассказываем, что представляет собой ссылочная масса, какие ее типы выделяют, как она формируется и влияет на рейтинг сайта, а также даем несколько советов о ее наращивании.
    ссылочная масса
    Что такое ссылочная масса сайта
    Ссылочный профиль (масса, вес) — это совокупность всех внешних гиперссылок, которые указывают на определенный сайт. Чем больше качественных внешних ссылок указывают на веб-ресурс, тем выше его авторитет с точки зрения поисковых систем. Поэтому внутренние ссылки, то есть оставленные в пределах самого сайта, ведущие на него же, не являются частью ссылочной массы.
    ссылочная масса
    ссылочная масса

Schreibe einen Kommentar

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.